Payment & Shipping Terms:
|Product Name:||Industrial Sand Dryer Equipment||Model:||2.5×7|
|Shell Volume:||16.63m³||Rotate Speed:||4-10r/min|
|Motor Power:||7.5×2kw||Application:||Sea Sand, River Sand, Silica Sand|
|Condition:||New||Color:||According To Customer|
Environmental Protection Industrial Sand Dryer Equipment , Three Cylinder Dryer
Industrial sand dyer equipment is used for dying materials such as sea sand, river sand, silica sand. If your material moisture is 20-40%, the final moisture can meet you requirement as your requirement. The capacity ranges form 1 to 70 t/h. There are two kinds of dryer for choice: single rotary dryer and three cylinder dryer.
1. Three-cylinder dryer can take full advantage of excess heat, reduce heat loss and increase the heat exchange area, making the unit evaporation intensity of the dryer greatly improved, thereby effectively improving the heat energy utilization rate, reducing the energy consumption and making the heat efficiency of three-cylinder dryer improved in a wider range. Compared with single-cylinder dryer with the same efficiency, its heat efficiency is improved about 50% and energy consumption saving doubles.
2. Because the cylinder length of the three-cylinder dryer is one third of single-cylinder dryer and the base area saves about 60% than the single-cylinder dryer, the base investment is reduced correspondingly.
3. The dryer drives by adopting the friction between supporting roller and belting leather, and the transmission power is low, thereby reducing the noises when the equipment working.
4. The cylinder sealing system of the dryer adopts micro-contact technology, with better sealing effect and reducing the dust pollution.
5. The cylinder and raising material board of the dryer both adopt alloy steel plates which is double service life of common steel plates.
6. Three-cylinder dryer can use coal, oil, gas as fuel, dry different shapes of material, such as lump, granular, powder and other various materials.
|Diameter of outer cylinder(m)||2.5||2.7||3.0||3.2||3.6|
|Length of outer cylinder(m)||7||7||7.0||7.0||8|
|Cylinder volume( m³ )||16.63||16.63||52.678||52.678||81.38|
|Rotating speed of cylinder(rpm)||4-10||4-10||4 -10||4 -10||4 -10|
|Initial moisture of slag(%)||10-12||10-12||10-12||10-12||10-12|
|Final moisture of slag(%)||1||1||1||1||1|
|Initial moisture of yellow ground(%)||8-10||8-10||8-10||8-10||8-10|
|Final moisture of yellow ground (%)||0.5-1||0.5-1||0.5-1||0.5-1||0.5-1|
|Highest intake air temperature(℃)||700-750℃||700-750℃||700-750℃||700-750℃||700-750℃|
|Production capacity(T/h)||Yellow sand25-30
|Velocity ratio of reducer||29||29||29||29||29|
The Delivery Site of 1.5×15 Rotary Dryer